Experimental Procedure:
- Switch on measuring amplifer.
- Mount the thermopile at a separation of L=600 mm from the heat source,connect to the measuring amplifier,the offset should be very low(background radition).
- Connect up the heat source and switch ON.
- Set the power regulation on the measuring amplifier to 4-5 and wait till the temperature become constant.
- Take the series of measurements by reducing the separation L in steps of 50mm and measure teh irradiance E and the reading of teh separation L.
Virtual Experimentation Procedure :
- TO RUN THIS EXPERIMENT CLICK RUN BUTTON INDICATED AS AN ARROW
INPUT PALETTE :
OUTPUT PALETTE :